Studio-Quality FDM Terrain: Part 1 – Preparing Your Prints
|
|
How to disguise layer lines, build realistic textures, and prepare your 3D-printed terrain for a studio-quality paint job.
FDM printing has become an excellent way to produce large quantities of beautifully detailed tabletop terrain, but achieving a convincing painted finish can present a few challenges. Visible layer lines, printing artifacts and overly uniform surfaces can make even beautifully designed models look unmistakably 3D-printed.
In this two-part guide, we'll take you through the process we developed for our Dreadwatch: The Sundered Stockade terrain, transforming raw FDM prints into richly textured, weathered scenery. Our aim is to achieve results that rival traditional scratch-built scenery or injection-moulded plastic kits, suitable for everything from narrative wargaming to close-up miniature photography.
Our objectives are straightforward:
Disguise visible FDM layer lines and printing artifacts.
Introduce natural, irregular surface textures.
Develop a dark, grimy finish with interesting colour variation.
Keep the terrain visually subdued so the miniatures remain the focus.
Use affordable, readily available materials wherever practical.
In Part 1, we'll focus on preparing the prints: cleaning up printing artifacts, building natural textures and disguising layer lines before we introduce any colour.
Part 2 covers the painting process, from sponging the stonework and painting the details through to applying washes, rust effects and final weathering.
This is a fairly thorough process, developed with studio photography in mind. You don't need to follow every step to achieve excellent results, so feel free to adapt the techniques to suit your time, budget and expectations. Whatever you decide, we're certain you'll find something useful amongst these steps!
Prefer to watch? Our full video tutorial demonstrates every stage of the process, with plenty of additional context and advice along the way. We'd recommend checking it out!
FDM printer and PLA filament (black recommended)
Heat gun
Coarse or medium builders' sand
PVA glue
Sandpaper or abrasive pad
Old brushes, including a large brush for basecoating
Material |
Product Used |
Purpose |
Black textured masonry paint |
Wickes Textured Masonry Paint |
Basecoat and surface texture |
Acrylic modelling paste |
Winsor & Newton Galeria Modelling Paste |
Disguising layer lines |
Dark grey paint |
Wickes Anthracite |
Stone base colour |
Light ivory paint |
Wickes Sandstone |
Stone highlights |
Brown emulsion |
Dulux Dipped Chocolate |
Wood base colour |
Dark metallic paint |
Citadel Leadbelcher |
Ironwork |
Black acrylic wash |
Vallejo Wash Effects for Dark Vehicles |
Shadows and definition |
Burnt Umber acrylic |
Artist acrylic |
Dirty wash |
Sap Green acrylic |
Artist acrylic |
Dirty wash |
Black acrylic ink |
Artist ink |
Dirty wash |
Matte medium |
Acrylic medium |
Dirty wash |
Rust effect |
Dirty Down Rust |
Corrosion and rust streaks |
Household sponges, cut into manageable pieces
Mixing containers
Paper towels
Small detail brushes
Super glue
Clippers
Water for thinning and cleaning
A note on materials: These are the products we used in the UK, and some have been chosen by virtue of dwelling in my shed already. Don’t be afraid to substitute with similar products from your own collection or local hardware or hobby shop.
If you’re not sure, test unfamiliar materials on a spare print before applying them across an entire collection.
For this project, we printed our Dreadwatch terrain using the following settings:
Setting |
Studio Configuration |
Printer |
Bambu Lab P1P |
Filament |
eSUN PLA+ |
Filament colour |
Black |
Nozzle diameter |
0.4 mm |
Layer height |
0.08 mm |
Ironing |
Enabled for top surfaces |
Other settings |
Standard slicer profiles |
The 0.08 mm layer height produces significantly longer print times, but gives us a smoother starting point for painting.
Ironing helps reduce visible top-surface printing patterns, particularly on flat horizontal surfaces.
We recommend black filament for dark terrain. Missed areas during painting are less conspicuous, and exposed plastic from scratches or chips is less noticeable than brightly coloured filament.
These settings aren't mandatory. Faster prints can still produce excellent painted terrain, particularly if you're not aiming to hide all traces of FDM printing artefacts.
Don’t get too hung up on following our settings, you know your machine best - and the following techniques work regardless of your chosen layer height or nozzle diameter.
Before painting, inspect the prints for fine strands of filament, or stringing, between details.
A brief pass with a heat gun will quickly remove those unwanted strands.
Keep the heat gun moving.
Use short passes rather than prolonged exposure.
Avoid overheating as this may warp your print and break your Keystone connections.
Important: Excessive heat can soften and warp PLA. If you’re not confident, try testing on a smaller, sacrificial piece to get some experience with the technique.
Take Care: Observe common-sense safety considerations when using the heat gun, check the appliance manual for safety procedures, and consider ventilation requirements.
Cover the terrain with a generous coat of black textured masonry paint. This is a thick, water-based emulsion designed for painting the outside of buildings.
We used Wickes own-brand textured masonry paint, an inexpensive product available in large tubs from the UK hardware retailer.
Hobbyists outside the UK: Found a good local alternative? Drop us an email so we can update the article for your fellow countryfolk.
The paint serves two purposes: providing a consistent matte-black foundation and introducing fine surface texture that helps disguise FDM layer lines. Its relatively thick consistency also helps soften some of the finer printing artifacts and even out the surface.
Method
Apply the paint using a large brush, working through the terrain in batches.
Ensure good coverage across exposed surfaces and recessed details.
As the paint begins to settle, remove any excessively thick deposits that could obscure sculpted details or interfere with Keystone connections.
Can't find textured masonry paint? You can experiment with adding fine sand or baking soda to ordinary black emulsion (wall paint), although premixed textured paint offers more consistent results between batches.
Next, introduce some larger-scale texture using PVA glue and builders' sand.
This is particularly effective on the foundations, creating areas where dirt and debris would naturally accumulate.
Method
Brush PVA glue onto selected areas.
Sprinkle builders' sand over the glue.
Vary the coverage, concentrating on corners, cracks and recesses.
Allow the glue to dry completely.
With a piece of sandpaper, scratch and wipe away any unwanted buildup on raised surfaces.
Builders' sand contains a variety of grain sizes, helping create a more natural distribution of debris.
Avoid covering every surface uniformly. The goal is to introduce irregularity while retaining the underlying sculpted details. Furthermore, avoid adding sand to any areas that might interfere with the placement of more Keystone Parts.
This is one of the most useful tricks we’ve found for improving the appearance of FDM terrain.
We use Winsor & Newton Galeria Modelling Paste, a water-based acrylic medium with a fine texture that holds its shape as it dries.
Rather than completely filling every layer line, we're breaking up those regular printing patterns with a more random and natural-looking surface texture.
Method
Using an old brush, stipple small amounts of modelling paste onto areas where printing artifacts are particularly noticeable.
Concentrate on:
Flat tops of walls and exposed masonry.
Smooth vertical surfaces.
Undersides of archways and other overhangs.
Window openings and awkward printed details.
Large, flat foundation stones.
You can apply the paste more generously to overhangs, where printing artifacts tend to be especially pronounced.
For areas where we've added builders' sand, a thin application of paste helps fill the gaps between the larger grains, creating a more convincingly scaled dirt and debris texture.
The key is restraint. We want to disguise mechanical-looking patterns without burying the sculpted details beneath thick layers of paste. Complete coverage isn't necessary, focus on the areas that catch your eye.
Once the sand, glue and modelling paste have dried, apply a second coat of black textured masonry paint.
This unifies the different materials beneath a consistent finish, seals loose surface texture and prepares the terrain for colour.
At this point, the pieces should look noticeably more irregular and weathered than the original prints, even though they're still entirely black.
And there we have it! We've spent all this time turning a piece of black plastic into... a slightly grungier-looking piece of black plastic.
But take a closer look, and you should see a substantial improvement. Those telltale layer lines are far less conspicuous, the added texture has broken up the uniform printing patterns, and the surfaces have a much more natural, weathered appearance.
We've now got a strong foundation for painting, and all that preparation is going to pay off once we start introducing colour.
In Part 2: Painting & Weathering, we'll take these prepared pieces through the rest of our studio process, building up the stonework with sponge painting, picking out the wood and metal details, and bringing everything together with washes and rust effects.
READ PART 2: PAINTING & WEATHERING →
And if you'd rather see the whole process in action, don't forget to check out the full video tutorial on Youtube.
If you're new to Dreadwatch or our modular Keystone Terrain System, we've got more videos covering printing, assembly and building your own ruined structures.
Dreadwatch / Keystone YouTube Playlist →
We'd also love to see your own painted terrain. Join the Bestiarum Discord and visit our dedicated Keystone channel to share projects, exchange tips and find inspiration from fellow hobbyists.
Happy hobbying!